CyberResearch CPEX CEL-24-X Manuel d'utilisateur Page 38
- Page / 92
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
CPEX Series CyberResearch
®
CPU Cards
26 ©Copyright 2005 CyberResearch, Inc.
Type [Auto]
Selects the type of IDE drive. Setting to Auto allows automatic selection of the
appropriate IDE device type. Select CDROM if you are specifically configuring a
CD-ROM drive. Select ARMD (ATAPI Removable Media Device) if your device is
either a ZIP, LS-120, or MO drive.
Configuration options: [Not Installed] [Auto] [CDROM] [ARMD]
LBA/Large Mode [Auto]
Enables or disables the LBA (Logical Block Addressing)/Large mode. Setting to Auto
enables the LBA mode if the device supports this mode, and if the device was not
previously formatted with LBA mode disabled.
Configuration options: [Disabled] [Auto]
Block (Multi-sector Transfer) [Auto]
Enables or disables data multi-sectors transfers. When set to Auto, the data transfer
from and to the device occurs multiple sectors at a time if the device supports
multi-sector transfer feature. When set to Disabled, the data transfer from and to
the device occurs one sector at a time.
Configuration options: [Disabled] [Auto]
PIO Mode [Auto]
IDE Programmed I/O (PIO) Mode programs the timing cycle between IDE drive and
the programmable IDE controller. As PIO mode increases, the cycle time decreases.
Select [Auto] to let AMIBIOS select the PIO mode. If you select a specific value for
the PIO mode, you must be absolutely sure that the value you are selecting is
supported by the IDE being configured.
Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode for the device.
Configuration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0]
[MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5]
SMART Monitoring [Auto]
SMART stands for Smart Monitoring, Analysis, and Reporting Technology. It allows
AMIBIOS to use the SMART protocol to report server system information over a
network.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Disabled]
Enables or disables 32-bit data transfer. If the host controller does not support
32-bit data transfer, this menu must be set to [Disabled]
Configuration options:[Disabled] [Enabled]
Hard Disk Write protect [Disabled]
This menu allows you to enable or disable the hard disk write protect.
Configuration options: [Disabled] [Enabled]
IDE Detect Time Out (Sec) [35]
Selects the time out value for detecting ATA/ATAPI devices.
Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]
ATA(PI) 80Pin Cable Detection [Host & Device]
This menu allows you to configure the mechanism for detecting 80-pin ATA(PI)
cable.
Configuration options: [Host & Device] [Host] [Device]
- CPEX Series 1
- CyberResearch, Inc. iii 5
- Intentionally Blank 6
- CyberResearch, Inc. v 7
- Package Contents 9
- Table of Contents 10
- 1.1 Introduction 13
- 1.2 Features 13
- 1.3 Specification 14
- Display 15
- Ethernet 15
- Multi I/O Ports 15
- Expansion Slot 15
- 1.4 Jumpers and Connectors 16
- CPU Cards 18
- 1.6 Block Diagram 19
- 1.7 Jumper Settings 20
- 1.8 System Memory 21
- 1.9 Cache Memory 22
- 1.10 Processor Installation 22
- CyberResearch 23
- CPU Cards CPEX Series 23
- CyberResearch, Inc. 11 23
- FDD1: FDC Connector 24
- 2.3 Parallel Port (LPT) 25
- 2.6 DVI Connector (DVI) 27
- S_ATA3, & S_ATA4,) 29
- 9 7 5 3 1 30
- 10 8 6 4 2 30
- 2.14 VGA Connector (VGA) 31
- Chapter3 AMI BIOS SETUP 33
- 3.4 Getting Help 34
- 3.5 BIOS menu bar 34
- 3.6 Main 35
- 3.7 Advanced 35
- 3.7.10 USB Configuration 43
- USB Function [8 USB Ports] 43
- Legacy USB Support [Enable] 43
- USB 2.0 Controller [Enabled] 43
- 3.8 PCI PnP 44
- 3.9 Boot 45
- 3.10 Security 47
- 3.11 Chipset 48
- 3.12 Power 50
- 3.13 Exit 51
- Utility 52
- 4.3 Windows XP Driver Setup 53
- 5.1 Introduction 55
- 5.2 Windows XP Driver Setup 55
- Chapter 6 LAN Configuration 57
- 7.1 Introduction 61
- 7.2 Installation 61
- Appendix A Watchdog Timer 65
- B.2 Floppy Connector 68
- B.3 Parallel Port Connector 68
- B.4 Serial Port 69
- B.7 DVI Connector 70
- B.8 USB Port Connector 71
- B.9 LAN Connector 71
- B.11 Fan Connector 72
- B.12 Serial ATA Connector 73
- PIN NO. DESCRIPTION 74
- DESCRIPTION 74
- B.17 ATXCTL Connector 75
- Appendix C Address Mapping 76
- C.3 IRQ Mapping Table 77
- C.4 DMA Channel Assignments 77
- Appendix D ATX Power Supply 79
- Product Service 87
- Warranty Notice 89
- CyberResearch, Inc 92
Produits connexes et manuels pour Cartes mères CyberResearch CPEX CEL-24-X
(262 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.557 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels